Town & Country V6-3.8L (2009)
ROD-PANEL TO PANEL LOCKING
1. Remove the door assembly and place on a bench.
2. Remove the fasteners from the first panel to second panel hinge (2).
3. Remove the panel to panel lock rod (6).
Frame
INSTALLATION
NOTE: Make sure both doors are latched close. Assembly is very flexible and will break if doors are not latched. Careful when removing.
1. Position the cover/door in vehicle.
2. Install the 18 nuts (2) to cover/door assembly.
3. Install the rear center filler panel (3).
4. Close sliding door.
Cover
INSTALLATION