Town & Country V6-3.8L (2009)
Door Module: Service and Repair
Door Module - Removal
REMOVAL
MODULE - FRONT DOOR
1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel. See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door Trim Panel -
Removal.
3. Disconnect the electrical connectors.
4. Remove the mounting fasteners.
5. Remove the door module.
MODULE - SLIDING DOOR
1. Disconnect and isolate the battery negative cable.
2. Remove the sliding door trim panel. See: Doors, Hood and Trunk/Doors/Sliding Door/Sliding Door Interior Trim Panel/Service and Repair/Door
Trim Panel - Removal.
3. Disconnect the electrical connectors.
4. Remove the mounting fasteners.
5. Remove the door module.