Town & Country V6-3.8L (2009)
Sunroof / Moonroof Windguard: Service and Repair
Wind Deflector - Installation
INSTALLATION
INCLUDING FRONT HINGES
1. Position the spring arms down into the trough.
2. Place wind deflector arms in upward position engage the wind deflector blade into the U-frame.
3. Seat the retaining clips (2) fully.
NOTE: Right side shown, left side similar.
4. Position the wind deflector clips into the frame at the detent and secure outside of clip then the inside of the clip fully.
5. Verify wind deflector operation.
6. Install the sunroof assembly See: Service and Repair/Removal and Replacement/Sunroof - Installation.
WITHOUT FRONT HINGES
1. Position wind deflector assembly (1) into the roof opening (2) and slide forward to the mounting point in the U-frame.
NOTE: Right side shown, left side similar.
2. Position the wind deflector clips into the frame at the detent and secure down into the channel fully.