Town & Country V6-3.8L (2009)
NOTE: Illustration shown with seat back cover and foam removed for clarity.
1. Remove the head restraint from the seat back See: Headrest - Removal.
2. Remove the plastic cover from the rear of the seat back See: Seat Cover/Service and Repair/Seat Back Cover - Removal.
3. Reach up under seat back frame (2) and pinch together the two retainer barbs (4) located on each head restraint sleeve (1 and 3).
4. With the retainer barbs pinched together, pull the two head restraint sleeves (1 and 2) upward and out of the seat back.
Second Row, Stow-n-Go
REMOVAL
1. Lift head restraint (1) to top of travel in seat back.
2. Depress lock button (2) on side of sleeve.
3. Pull head restraint upward out of seat back.
