Town & Country V6-3.8L (2009)
Power Seat Control Module: Service and Repair
Third Row Power Folding Seat Module - Installation
INSTALLATION
1. Position the third row power folding seat module (1) onto the module bracket (3). Ensure the mounting knobs (2) and retaining tabs (4) are aligned
with the appropriate slots in the bracket (3).
2. Push the module into the bracket until the mounting knobs (2) and retaining tabs (4) are fully seated.
3. Connect the module (4) electrical connector (3).
4. Position the third row power folding seat module and bracket (4) onto the seat pan (2) and secure with the pushpin retainers (1).
5. Install the seat cushion and cover assembly, See: Seat Cover/Service and Repair/Seat Cushion Cover - Installation.
6. Install the third row power folding seat, See: Service and Repair/Removal and Replacement/Seats, First Row/Seat - Installation.
7. Perform the third row power folding seat recliner calibration, See: Testing and Inspection/Programming and Relearning. Verify proper seat
operation.