Town & Country V6-3.8L (2009)
1. Screw the front tilt motor gearbox spindle (3) in or out as necessary until the motor retaining screws (4) and spindle screw (2) holes are aligned
and all fasteners can be installed.
2. Position the front tilt motor and gearbox assembly (1) onto the seat track.
3. Install the motor retaining screws (4). Tighten the screws to 12 Nm (106 in. lbs.).
4. Install the front tilt motor gearbox spindle (3) retaining screw (2). Tighten the screw to 17 Nm (150 in. lbs.).
5. Connect the motor electrical connector.
6. Install the power seat, See: Service and Repair/Removal and Replacement/Seats, First Row/Seat - Installation.
7. Verify proper power seat operation.
Third Row - Power Folding Seat Recliner Motor
INSTALLATION
CAUTION: Take care when assembling the recliner mechanism parts. Improper part alignment on installation can result in poor seat recliner
operation.
1. Carefully align and insert the recliner torque rod (2) into the recliner motor (3).
2. Continue to push the recliner motor onto the torque rod until it is past the mounting surface on the crosstalk tube protect bracket.
3. Carefully align and insert the recliner torque rod (2) into the recliner assembly (4).
4. Continue to push the recliner assembly onto the torque rod until the screw holes are aligned with those on the crosstalk tube protect bracket (1).
