Town & Country V6-3.8L (2009)
5. Install the gear cover (4) and secure with four retaining screws (3). Tighten the screws to 3.5 Nm (31 in. lbs.).
6. Grasping the seat bottom, slightly move the seat up or down until the stow motor contacts the mounting surface on the seat frame (1). Install the
two stow motor retaining bolts (2) and tighten to 27 Nm (19 ft. lbs.).
7. Connect the motor electrical connector (5).
8. Remove the seat from the vehicle.
9. Install the seat cushion and cover assembly, See: Seat Cover/Service and Repair/Seat Cushion Cover - Installation.
10. Install the third row power folding seat, See: Service and Repair/Removal and Replacement/Seats, First Row/Seat - Installation.
11. Perform the third row power folding seat recliner calibration, See: Testing and Inspection/Programming and Relearning. Verify proper seat
operation.
