Town & Country V6-3.8L (2009)
Seat Cover: Service and Repair
Seat Back Cover - Installation
First Row
INSTALLATION
NOTE: Left seat shown in illustrations. Right seat similar.
1. Position the seat cushion cover (2) to the seat cushion (5) and engage the retaining strips (1) to the clips (3).
2. Install the seat back cover (2) and the seat back cushion (3) onto the seat back frame (5) as an assembly.
3. Engage the seat back cover to the two metal tabs (4) located near the bottom of the seat back frame.
4. Engage the five J-hook retainers (1) that secure the top and sides of the seat back cover to the seat back frame.
5. Install the headrest sleeves See: Head Rest/Service and Repair/Headrest Sleeve - Installation.
6. Install the headrest See: Head Rest/Service and Repair/Headrest - Installation.
7. Install the armrest See: Interior Moulding / Trim/Arm Rest/Service and Repair/Armrest - Installation.
8. Install the seat back panel See: Seat Back/Service and Repair/Seat Back Panel - Installation.
9. Install the seat back onto the seat See: Seat Back/Service and Repair/Seat Back - Installation.
10. Install the seat into the vehicle See: Service and Repair/Removal and Replacement/Seats, First Row/Seat - Installation.
Second Row, Swivel
INSTALLATION
NOTE: Right seat shown in illustrations. Left seat similar.