Town & Country V6-3.8L (2009)
of the seat cushion frame (2).
10. Install the seat back See: Seat Back/Service and Repair/Seat Back - Installation.
11. Install the seat into the vehicle See: Service and Repair/Removal and Replacement/Seats, First Row/Seat - Installation.
Second Row, Swivel
INSTALLATION
NOTE: Right seat shown in illustrations. Left seat similar.
1. Position the seat cushion cover (2) to the seat cushion (5) and engage the retaining strips (1) to the clips (3).
2. If equipped with heated seats, connect the seat cushion wire harness connector to the heated seat wire harness.
3. Install the seat cushion and cover onto the seat cushion frame (7).
4. Engage the J-hook retainer (3) that secures the seat cushion cover to the front of the seat cushion frame.
5. Engage the four J-hook retainers (2 and 4) that secure the seat cushion cover to the sides of the seat cushion frame.
6. Engage the J-hook retainer (8) that secures the seat cushion cover to the rear of the seat cushion frame.
7. Install the eight spacers (6) onto the mounting studs of the seat tracks (1 and 5).