Town & Country V6-3.8L (2009)
10. Disengage the four J-hook retainers (2 and 4) that secure the seat cushion cover to the sides of the seat cushion frame.
11. Disengage the J-hook retainer (3) that secures the seat cushion cover to the front of the seat cushion frame.
12. Remove the seat cushion and cover from the seat cushion frame.
13. If equipped with heated seats, disconnect the seat cushion wire harness connector located at the rear of the seat frame.
14. Disengage the seat cushion support (1) from the six retaining tabs (9) located on the seat cushion frame (2) by using a small punch or similar tool
as a lever. Place the punch or tool through the six holes in the support and into the corresponding holes in the seat cushion frame, then stretch the
support off the retaining tabs.
15. Remove the six bolts (3, 4 ,8 and 10) that secure the seat tracks to the bottom of the seat cushion frame and remove the tracks from the frame.
Second And Third Row, Bench
REMOVAL
1. Remove the seat from the vehicle and place it on a workbench.
2. Disengage the seat track adjuster link wire (1) from the seat track (4) being serviced.
3. Remove the nuts (3) that secure the seat track to the riser (2) and remove the seat track.
4. If required, remove the bolts (5) that secure the riser to the seat cushion frame and remove the riser.
First Row - Manual Front
INSTALLATION
