Town & Country V6-3.8L (2009)
1. Insert the switch (3) into the switch retaining cover (2).
2. Connect electrical connector.
3. Install the switch and retaining cover assembly into the seat cover.
a. Slide the switch and retaining cover assembly (2 AND 3) into the two holding tabs (4) of the switch retainer sewn into the seat cover (1).
b. Push the switch and retaining cover assembly (2 AND 3) down until the retaining tabs (5) are fully engaged.
4. Install the seat cushion and cover assembly, See: Seats/Seat Cover/Service and Repair/Seat Cushion Cover - Installation.
5. Install the third row power folding seat, See: Seats/Service and Repair/Removal and Replacement/Seats, First Row/Seat - Installation.
6. Perform the third row power folding seat recliner calibration, See: Seats/Testing and Inspection/Programming and Relearning. Verify proper seat
operation.
