Town & Country V6-3.8L (2009)
7. Hook up the scan tool to initialize the ABM and perform the following:
a. Clear any faults.
b. Fill the master cylinder to the proper fill level and bleed the base and ABS hydraulic systems. See: Brake Bleeding/Service and Repair
c. Check for leaks.
d. Perform the ABS Verification Test and road test the vehicle. See: Brake Bleeding/Service and Repair
Hydraulic Control unit (HCU) - Removal
REMOVAL
To remove the HCU, the ICU must be removed and disassembled. See: Integrated Control Unit (ICU) - Removal See: Overhaul/Integrated Control Unit
(ICU) - Disassembly