Town & Country V6-3.8L (2009)
20. Pull the parking brake cable strand (1) outward from the cable housing and hook it onto the caliper lever (2).
21. Push the excess cable strand back into the cable housing, then insert the cable housing (3) into the mounting bracket (1) until the retainer fingers
(2) lock into place. Make sure both fingers are engaged preventing removal of the cable from the bracket.
22. Reconnect the parking brake cable equalizer and reset the automatic self-adjusting mechanism tension of the parking brake lever assembly. See:
Parking Brake System/Service and Repair
23. Install tire and wheel assembly (1) See: Maintenance/Wheels and Tires/Service and Repair/Removal and Replacement/Tires and Wheels -
Installation. Install and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.).
24. Lower vehicle.
25. Connect battery negative (-) cable to battery post.
26. Road test vehicle making several stops to wear off any foreign material on brakes and to seat brake pads.
