Town & Country V6-3.8L (2009)
5. Install new front rotors. Refer to the detailed installation procedures available in DealConnect > TechCONNECT under: Service Info > 05-Brakes >
Brakes, Base > Hydraulic/Mechanical > ROTOR, Brake > Installation > Front.
6. Using a PSE approved on-vehicle brake lathe, lightly resurface both front rotors.
NOTE:
Follow all resurfacing directions and procedures associated with the equipment used.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.