Town & Country V6-3.8L (2009)
7. Slide the cable strand out of the mounting bracket, then pull the parking brake cable strand (1) upward and unhook it from the caliper lever (2).
8. Remove the banjo bolt (3) connecting the brake flex hose (2) to the brake caliper (1). There are two washers that will come off with the banjo bolt.
Discard the washers. They should not be reused.
CAUTION: When removing or installing a caliper guide pin bolt, it is necessary to hold the guide pin stationary while turning the bolt. Hold
the guide pin stationary using a wrench placed upon the pin's hex-shaped head.
9. Remove two caliper guide pin bolts (1).
10. Slide the disc brake caliper (2) from the disc brake adapter bracket and brake pads.
Front
INSTALLATION
