Town & Country V6-3.8L (2009)
21. Position the A/C compressor (7) onto the engine and tighten the nuts (5 and 6) and bolt (2) in the following sequence:
-
Install the bolt (2) and hand tighten.
-
Install the nuts (5 and 6) and hand tighten.
-
Tighten front 8mm nuts (6) to 23 Nm (17 ft. lbs.).
-
Tighten rear upper 10 mm bolt (2) to 40 Nm (30 ft. lbs.).
-
Tighten rear lower 10 mm nut (5) onto the stud with spacer (4) to 40 Nm (30 ft. lbs.).
22. Install accessory drive belt (1) See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Removal and
Replacement/Serpentine Accessory Drive Belt - Installation.
