Town & Country V6-3.8L (2009)
Exhaust Manifold: Procedures
Left
CLEANING
1. Discard gasket (if equipped) and clean all surfaces of manifold and cylinder head.
Right
CLEANING
1. Discard gasket (if equipped) and clean all surfaces of manifold and cylinder head.
Left
INSPECTION
Inspect exhaust manifolds for damage or cracks and check distortion of the cylinder head mounting surface and exhaust crossover mounting surface with
a straightedge and thickness gauge (1).
Manifold surface flatness limits should not exceed 1.0 mm (0.039 in.).
Right
INSPECTION
