Town & Country V6-3.8L (2009)
Air Duct: Service and Repair
Floor Distribution Duct - Removal
Front
REMOVAL
1. Remove the center floor console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Floor Console - Removal.
2. Remove the front seats See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Seats, First Row/Seat - Removal.
3. Roll back the front floor carpet from under the instrument panel toward the rear of the vehicle See: Body and Frame/Interior Moulding /
Trim/Carpet/Service and Repair/Carpet - Removal.
4. Disengage the right intermediate floor distribution duct (2) and the left intermediate floor distribution duct (4) from the studs located on the floor
support (3).
5. Disconnect the right and left intermediate floor distribution ducts from the front HVAC housing (1) and remove the ducts from the vehicle.
Rear
REMOVAL
1. Remove right rear quarter trim panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Luggage Compartment
Trim/Quarter Trim Panel - Removal.
2. Disengage the rear floor distribution duct (1) from the two studs (2) located on the right inner quarter panel (3).
3. Slide the rear floor distribution duct forward and disengage it from the rear heater-A/C housing (4).
4. Remove the rear floor distribution duct from the vehicle.