Town & Country V6-3.8L (2009)
1. Disconnect and isolate the negative battery cable.
2. Remove the center bezel from the instrument panel.
3. Remove the screw (1 and 5) that secures each center instrument panel duct (2 and 4) to the instrument panel support (6).
NOTE: If the foam seal on each center instrument panel duct is deformed or damaged, it must be replaced.
4. Disconnect the center instrument panel ducts from the center distribution duct (3) and remove the center ducts from the vehicle.
OUTBOARD AND CENTER DISTRIBUTION DUCTS
NOTE: Take the proper precautions to protect the front face of the instrument panel from cosmetic damage during this service procedure.
1. Disconnect and isolate the negative battery cable.
NOTE: It is not necessary to remove the front HVAC housing from the vehicle when servicing the instrument panel ducts. The instrument
panel should be removed separately.
2. Remove the instrument panel and place it on a workbench.
3. Remove the instrument panel cover.
4. Remove the screws (1 and 4) that secure the passenger side instrument panel duct (2) and the demister duct (3) to the instrument panel support (5).
