Town & Country V6-3.8L (2009)
Blower Motor Resistor: Description and Operation
Description - Front
DESCRIPTION
A blower motor resistor is used on vehicles equipped with the front manual temperature control (MTC) heating-A/C system. Vehicles equipped with the
front automatic temperature control (ATC) heating-A/C system use a blower motor power module, instead of the blower motor resistor See: Control
Module HVAC/Description and Operation/Front Blower Motor Power Module - Description.
The front blower motor resistor is mounted to the rear of the HVAC housing, on the passenger side of the vehicle. The blower motor resistor consists of
a molded plastic mounting plate (1) with an integral wire connector receptacle (3). Concealed behind the mounting plate are resistors located between a
two-piece stamped steel base (2).
The blower motor resistor is accessed for service from underneath the instrument panel.
