Town & Country V6-3.8L (2009)
5. Lubricate new rubber O-ring seals with clean refrigerant oil and install them onto the underbody refrigerant line fittings. Use only the specified
O-rings as they are made of a special material for the R-134a refrigerant system. Use only refrigerant oil of the type recommended for the A/C
compressor in the vehicle.
6. Connect the underbody refrigerant extension lines (3) and the sealing plate (4) to the rear A/C expansion valve (1).
7. Loosely install the nut (2) that secures the extension lines and sealing plate to the rear A/C expansion valve.
8. Connect the underbody refrigerant lines to the underbody refrigerant extension lines and tighten the fitting nuts to 23 Nm (17 ft. lbs.).
9. Tighten the nut that secures the extension lines and sealing plate to the rear A/C expansion valve to 11 Nm (95 in. lbs.).
10. Lower the vehicle.
11. Evacuate the refrigerant system See: Service and Repair/Refrigerant System Evacuate.
12. Adjust the refrigerant oil level See: Service and Repair/Refrigerant Oil Level.
13. Charge the refrigerant system See: Service and Repair.
