Town & Country V6-3.8L (2009)
1. Disconnect and isolate the negative battery cable.
2. Recover the refrigerant from the refrigerant system See: Service and Repair/Refrigerant System Recovery.
3. Drain the engine cooling system See: Engine, Cooling and Exhaust/Cooling System/Service and Repair.
4. Remove the nut (3) that secures the A/C suction line (1) and the A/C liquid line (5) to the A/C expansion valve (2).
5. Disconnect the A/C suction and liquid lines from the A/C expansion valve and remove and discard the dual-plane seals.
6. Loosen the clamps and disconnect the heater hoses (4) from the heater core.
7. Install plugs in, or tape over the opened refrigerant line fittings and the expansion valve and heater core ports.
8. Remove the bolt (1) that secures the HVAC housing to the engine compartment side of the dash panel (2).
NOTE: Illustration shown with instrument panel removed for clarity.
