Town & Country V6-3.8L (2009)
Compass: Service and Repair
Compass and Mini-Trip Computer Module - Installation
INSTALLATION
1. Position the Remote Compass Module (RCM) (2) onto the top of the Instrument Panel (IP).
2. Install the RCM retaining screws (3).
3. Connect the electrical connector (1).
4. Install the instrument panel center stack hood.
5. Connect the battery negative cable.
6. Perform the Compass Variance Adjustment, See: Adjustments.
7. Perform the Manual Compass Calibration, See: Adjustments.
8. Verify proper compass operation.
