Town & Country V6-38L Tail Lamp Bulb Removal Guide
Tail Light Bulb: Service and Repair
Tail Lamp Bulb - Removal
BULBS
There are a total of two bulbs in the tail lamp unit:
-
Back-Up Lamp (1) (Dodge).
-
Tail, Stop and Turn signal (2) (Dodge).
NOTE: On the Crasher model vehicles, the Tail, Stop and Turn signal lamp is in position (1) and the Back Up lamp is in position (2),
1. Remove the tail lamp unit See: Service and Repair/Tail Lamp - Removal
2. Disconnect the electrical connector.
3. Remove bulb socket from tail lamp unit by twisting a quarter turn counterclockwise.
4. Pull socket straight out of tail lamp unit.
5. Pull bulb from socket.