Town & Country V6-3.8L (2009)
make sure boots moves freely on inner tie rod.
2. Loosen jam nut (3) at inner-to-outer tie rod connection.
3. Grasp inner tie rod at serrations (4) and rotate as necessary to adjust front toe to preferred toe specification. See: Specifications
4. Tighten tie rod jam nut (3) to specifications. See: Specifications/Mechanical Specifications/Suspension/System Specifications/Front Suspension
Specifications
5. Make sure inner tie rod-to-steering gear boot is not twisted, then reinstall boot clamp at inner tie rod.
6. Adjust front toe on opposite side of vehicle using above procedure as necessary.
7. Remove steering wheel clamp.
8. Remove alignment equipment.
9. Road test vehicle to verify steering wheel is straight and vehicle does not wander or pull.