Town & Country V6-3.8L (2009)
8. Remove stud head screw (2) securing pressure hose (3) routing clamp to intake manifold (4).
9. Remove screw (1) securing pressure hose (3) routing clamp to right side of engine (5).
10. Raise and support vehicle. See: Vehicle Lifting/Service and Repair
11. Remove screw (2) securing pressure hose clamp to right side of front suspension crossmember.
12. Remove screws (3) securing pressure hose routing clamps to rear of front suspension crossmember.
13. Remove tube nut fastening pressure hose (4) to power steering gear (3). Remove pressure hose from gear port.
14. Lower vehicle enough to access pressure hose from engine compartment, but still clearing floor.
