Town & Country V6-3.8L (2009)
8. Install brake shield (3) on knuckle (2). Install and tighten three mounting screws (1) to 8 Nm (71 in. lbs.).
9. Install brake rotor, then install disc brake caliper and adapter assembly. See: Brakes and Traction Control/Disc Brake System/Brake
Rotor/Disc/Service and Repair/Removal and Replacement/Brake Rotor - Installation
10. Verify that wheel speed sensor is routed properly, not allowing cable to come in contact with moving parts.
NOTE: Always install a new hub nut. The original hub nut is one-time use only and should be discarded when removed.
11. Install hub nut (1) on end of halfshaft stub shaft (2). With aid of a helper applying brakes to keep front hub from turning, tighten hub nut to 160
Nm (118 ft. lbs.).
12. Install tire and wheel assembly (1) See: Service and Repair/Removal and Replacement/Tires and Wheels - Installation. Install and tighten wheel
