Town & Country V6-3.8L (2009)
Fuel Injector: Service and Repair
Fuel Injector - Removal
3.3/3.8L
WARNING: The fuel system is under a constant pressure (even with the engine off). Before servicing any part on the fuel system, the fuel
system pressure must be released.
1. Release the fuel system pressure, See: Fuel Filter/Fuel Pressure Release/Service and Repair.
2. Disconnect and isolate negative battery cable at battery.
3. Remove clean air hose from throttle body, See: Air Cleaner Housing/Service and Repair/Air Cleaner Body - Removal.
4. Use a fuel line release tool to disconnect the quick connect fuel line (1) from the fuel rail (2).
