Town & Country V6-3.8L (2009)
Horn Relay: Description and Operation
OPERATION
The horn relay plugs into the Totally Integrated Power Module (TIPM) which is located in the engine compartment. See: Relays and Modules - Power
and Ground Distribution/Relay BoxFor circuit information and component locations, refer to the appropriate wiring information. See: DiagramsThe
wiring information includes wiring diagrams, proper wire and connector repair procedures, details of wire harness routing and retention, connector
pin-out information and location views for the various wire harness connectors, splices and grounds.
The horns will not function if the switch is "CLOSED" for more than 30 seconds. Once the switch is "OPEN", a 20-30 second delay will occur before the
horns are functional again.
