Town & Country V6-3.8L (2009)
4. Wiggle test each circuit during the test to check for an intermittent open in the circuit.
NOTE: The test light should be illuminated and bright with the ignition on and not illuminated with the ignition off. Compare the brightness
to that of a direct connection to the battery.
Is the test light illuminated as described above?
Yes
-
Test complete.
No
-
Repair the PCM Fused Ignition Switch circuit(s) for as necessary.
-
Perform the PCM Verification Test. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Diagnostic Trouble
Code Tests and Associated Procedures/Verification Tests/PCM Verification Test.
