Town & Country V6-3.8L (2009)
Power Sliding Door Switch: Service and Repair
Power Sliding Door B Pillar Switch - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Using a trim stick (special tool # C-4755) or equivalent, gently pry the leading upper edge of the B-pillar switch (2) away from the B-pillar trim
(1).
3. Once the upper edge is free from the B-pillar trim, rock the switch out of the switch opening.
4. Disconnect the B-pillar switch electrical connector (3).
5. Remove the B-pillar switch from the vehicle.