Town & Country V6-3.8L (2009)
Steering Gear: Service and Repair
Steering Gear - Removal
STEERING GEAR
1. Place front wheels of vehicle in STRAIGHT-AHEAD position.
2. Install steering wheel holder locking steering wheel in STRAIGHT-AHEAD position.
3. Remove negative (-) battery cable from battery and isolate cable.
4. Remove cap from power steering fluid reservoir.
5. Using a siphon pump, remove as much power steering fluid as possible from power steering fluid reservoir.
6. Raise and support vehicle. See: Wheels and Tires/Vehicle Lifting/Service and Repair
7. On each side of vehicle, remove wheel mounting nuts (3), then tire and wheel assembly (1).
