Town & Country V6-3.8L (2009)
12. Remove front engine mount thru-bolt (4).
13. Remove fore-aft crossmember front mounting bolt (6).
14. Remove four fore-aft crossmember rear mounting bolts (3, 4).
15. Remove the fore-aft crossmember.
16. Remove screws and push-pins securing heat shield (1) over right side of steering gear (2). Remove heat shield.
17. Remove the rear engine mount. See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Engine Mount/Service
and Repair/Engine Mount Insulator - Removal
