Town & Country V6-3.8L (2009)
11. Push wheel speed sensor head (1) into mounting hole in hub and bearing (3) and align mounting screw hole.
12. Install NEW mounting screw (2). Tighten mounting screw to 6 Nm (55 in. lbs.).
13. Install wheel speed sensor routing clip (2) into hole in rear axle.
14. Install brake rotor (2) over hub and bearing (1). See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service and
Repair/Removal and Replacement/Brake Rotor - Installation
