Town & Country V6-3.8L (2009)
4. With aid of a helper applying the brakes to keep the front hub from turning, on each side of the vehicle, remove the hub nut (1) from the axle
halfshaft stub shaft (2).
5. Push in on the end of each halfshaft stub shaft (2), disengaging its splines from the hub splines.
6. At each end of the stabilizer bar, while holding the stabilizer bar link (1) lower stud stationary (wrench placed on machined flats on stud), remove
the nut (2) securing the link to the stabilizer bar (3).
7. Remove the front engine mount thru-bolt (4).