Town & Country V6-3.8L (2009)
19. Install the rear engine mount. See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Engine Mount/Service and
Repair/Engine Mount Insulator - Installation
20. Position the heat shield (1) over the steering gear (2). Install the mounting screws and push-pins. Tighten the screws to 8 Nm (71 in. lbs.).
21. Position fore-aft crossmember in engine compartment and install mounting bolts (3, 4, 6). Tighten forward mounting bolt (6) to 113 Nm (83 ft.
lbs.). Tighten rearward mounting bolts (3, 4) at suspension crossmember (2) to 55 Nm (41 ft. lbs.).
22. Install front engine mount thru-bolt (4). Tighten bolt to 57 Nm (42 ft. lbs.).
