Town & Country V6-3.8L (2009)
7. Position the heat shield (1) over the steering gear (2). Install the mounting screws and push-pins. Tighten the screws to 8 Nm (71 in. lbs.).
8. Position the fore-aft crossmember in the engine compartment and install the mounting bolts (3, 4, 6). Tighten the forward mounting bolt (6) to 113
Nm (83 ft. lbs.). Tighten the rearward mounting bolts (3, 4) at the suspension crossmember (2) to 55 Nm (41 ft. lbs.).
9. Install the front engine mount thru-bolt (4). Tighten the bolt to 57 Nm (42 ft. lbs.).
