Town & Country V6-3.8L (2009)
5. On each side of vehicle, remove lower mounting bolt (4) and nut (3) securing shock absorber (5) to axle.
6. On each side of vehicle, remove screw fastening rear brake flex hose bracket to frame rail. Allow bracket to hang free, but do not bend it
downward, overextending flex in brake tubing.
7. Lower jack until each coil spring (1) can be removed from axle.
8. Remove one side or both coil springs (1), jounce bumpers (2) and lower isolators (3).
9. Remove jounce bumper (2) and lower isolator (3) from spring as necessary.
