Town & Country V6-3.8L (2009)
3. If servicing left strut:
a. Position the lower end of the strut assembly (1) in line with the upper end of the knuckle, aligning the mounting holes. Install the two strut
clevis-to-knuckle bolts (2).
b. Install strut clevis-to-knuckle nuts (3) on the two bolts (2). While holding the bolts in place, tighten the strut clevis-to-knuckle nuts to 88 Nm
(65 ft. lbs.) plus an additional 90° turn after torque is met.
4. If servicing right strut:
a. Position the lower end of the strut assembly (1) in line with the upper end of the knuckle, aligning the mounting holes. Install the two strut
clevis-to-knuckle bolts (2).
b. Install strut clevis-to-knuckle nuts (3) on the two bolts (2). While holding the bolts in place, tighten the strut clevis-to-knuckle nuts to 88 Nm
(65 ft. lbs.) plus an additional 90° turn after torque is met.