Town & Country V6-3.8L (2009)
1. Position shock absorber (5) at body bracket and install upper mounting bolt (2) and nut (1). Do not bolt at this time.
2. Raise or lower rear axle using jack as necessary until the shock absorber lower mounting bolt (4) can be inserted through the axle flange and shock
absorber lower mounting eye.
3. Install nut (3) on the lower mounting bolt (4). Do not bolt at this time.
4. Remove jack.
5. Lower vehicle.
6. Position vehicle on alignment rack/drive-on lift. Raise lift as necessary to access the rear suspension while keeping vehicle at curb (riding) height.
7. Tighten shock absorber upper and lower mounting bolt nuts to 75 Nm (55 ft. lbs.).
