Town & Country V6-3.8L (2009)
Trailing Arm Bushing: Service and Repair
Rear Axle Trailing Arm Bushing(s) - Removal
REMOVAL
NOTE: Before proceeding, See: Service Precautions/Vehicle Damage Warnings.
1. Raise and support vehicle. Be sure not to place frame contact hoist rear lift arms in position that will hinder axle trailing arm bushing access. See:
Wheels and Tires/Vehicle Lifting/Service and Repair
2. On each side of vehicle, remove wheel mounting nuts (3), then rear tire and wheel assembly (1).
3. Support each side of axle at coil springs. Place just enough load on jack stands to support axle at rear.
