Town & Country V6-3.8L (2009)
Sliding Door Window Regulator: Service and Repair
Window Regulator - Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Sliding Door/Sliding Door Interior Trim Panel/Service and
Repair/Door Trim Panel - Removal.
3. Remove the door module assembly. See: Body and Frame/Doors, Hood and Trunk/Doors/Sliding Door/Service and Repair/Carrier Plate -
Removal.
4. Remove the power window motor (if equipped). See: Power Window Motor/Front Door Window Motor/Service and Repair/Window Regulator
Motor - Removal.
5. Remove the regulator mounting fasteners and remove the regulator.