Town & Country V6-3.8L (2009)
Sliding Door Window Regulator: Service and Repair
Window Regulator - Installation
INSTALLATION
1. Install the regulator and mounting fasteners.
2. Install the power window motor. See: Power Window Motor/Front Door Window Motor/Service and Repair/Window Regulator Motor -
Installation.
3. Install the door module assembly. See: Body and Frame/Doors, Hood and Trunk/Doors/Sliding Door/Service and Repair/Carrier Plate -
Installation.
4. Install the door trim panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Sliding Door/Sliding Door Interior Trim Panel/Service and
Repair/Door Trim Panel - Installation.
5. Verify the sliding door operation and adjust as necessary.
6. Connect the battery negative cable.