Town & Country V6-3.8L (2009)
Wiper Motor Linkage: Service and Repair
Wiper Arm Linkage - Removal
REMOVAL
1. Release the hood latch and open hood.
2. Disconnect and isolate the battery negative cable.
3. Remove the wiper arms. See: Wiper Arm/Service and Repair/Wiper Arm - Removal.
4. Remove the cowl cover See: Body and Frame/Cowl/Cowl Moulding / Trim/Service and Repair/Cowl Panel Cover - Removal.
5. Disconnect the wiper module wire connector.
6. Remove the wiper module fasteners.
7. Remove wiper module and set on bench.