Town & Country V6-3.8L VIN L (2006)
Fig. 116 Parking Brake Cable Removal From Body Bracket
6. To remove parking brake cable housing from the body bracket, slide a 14 mm box end wrench over retainer end compressing the three fingers
(Fig. 116). Alternate method is to use an aircraft type hose clamp.
7. Remove the brake shoes from the brake support plate.
8. Disconnect parking brake cable from parking brake actuator lever.
Fig. 117 Removing Parking Brake Cable From Brake Support Plate
9. Remove the parking brake cable housing retainer from the brake support plate using a 14mm wrench to compress the retaining fingers (Fig. 117).
REMOVAL - FOLD - IN - FLOOR SEATING
1. Release the parking brake.
2. Raise and support the vehicle.
3. Manually release the automatic self-adjusting mechanism tension of the parking brake lever (pedal) assembly.
