Town & Country V6-3.8L VIN L (2006)
Right park lamp outage - 12 volt input on pin 21. Used to determine if right park lamp circuit is operating properly.
Left park lamp outage - 12 volt input on pin 41. Used to determine if left park lamp circuit is operating properly.
Battery IOD - 12 volt input on pin 20. The FCM enters a low power consumption mode when the ignition is turned OFF. This low current draw
battery supply keeps the microprocessor functioning in the low power mode.
Battery (+) connection detection - 12 volt input on pin 38. The battery connection on the PDC incorporates the use of an internal switch to
determine if the connector is properly mated and the Connector Positive Assurance (CPA) is engaged. If the CPA is not properly engaged, a voltage
on pin 38 will be interpreted as an unseated connector and a fault will set.
NOTE: If the FCM is replaced, ensure connection between the FCM and the PDC is in good condition.
