Town & Country V6-4.0L (2008)
Front Bumper Cover / Fascia: Service and Repair
Front Fascia - Removal
REMOVAL
1. Release hood latch and open hood.
2. Hoist vehicle and support with safety stands.
3. Remove front wheelhouse splash shields fasteners (6&7) as necessary to gain access to bolts attaching front fascia to fender (5).See: Fender/Front
Fender/Front Fender Liner/Service and Repair/Front Wheelhouse Splash Shield - Removal.
4. Remove the two bolts (4) and two push pins (3) attaching fascia to the upper core support.
5. Remove push pins (1) attaching the fascia (3) to the lower support (2).
6. Disconnect fog lamp wire connectors (2), if necessary.
