Town & Country V6-4.0L (2008)
Hood Latch: Service and Repair
Hood Latch Striker
Removal
REMOVAL
1. Using a grease pencil or equivalent, mark the position of the striker (1) on the hood to aid installation.
2. Remove the bolts (2) and remove the latch striker/safety catch (1).
Installation
INSTALLATION
1. Install the striker (1) and install the bolts (2).
2. Line up the striker (1) with the marks made on the hood previously and tighten the bolts (2) to 9 Nm (80 in. lbs.)