Town & Country V6-4.0L (2008)
Hood Latch Release Cable: Service and Repair
Installation
INSTALLATION
1. Push the cable through the hole (1) in the cowl panel.
2. Position the release handle (2) back and install the screws (3).
3. Seat the grommet in the hole (1) fully.
4. Position the cable (3) and seat the support clips (2) on the body and upper radiator crossmember, fully.
5. Install the upper radiator crossmember,See: Radiator Support/Service and Repair/Radiator Crossmember - Installation.
