chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Body - Howl/Honk Noise From A-Pillar/Windshield Area|Page 10578 > < Cowl Moulding / Trim|Removal|Page 10569
Page 1
background image

Windshield Moulding / Trim: Customer Interest
Body - Howl/Honk Noise From A-Pillar/Windshield Area

NUMBER: 23-023-08

GROUP: Body

DATE: August 1, 2008

SUBJECT:
Whistle, Honk Or Howl Sound Coming From "A" Pillar Or Windshield Area

OVERVIEW:
This bulletin involves applying clear flowable silicone sealer to the backside of the windshield molding lip seal to adhere the lip seal to the A-Pillar.

MODELS:

2008

(RI)

Town & Country/Grand Caravan

SYMPTOM/CONDITION:

The customer may experience a whistle, honk or howl sound from the A-Pillar area or windshield area of A-Pillar on either side of the vehicle. A
combination of high ambient temperatures above 32° C (90°F), high driving speeds 112 Kph (70 Mph) or higher and cross winds are required to make
this sound occur. The condition may be intermittent or can be continuous when the conditions are met.

An outer lip seal on the windshield moulding that contacts the A-Pillar may vibrate and cause this sound.

DIAGNOSIS:
If the vehicle exhibits the condition described in the Symptom/Condition, perform the Repair Procedure.

PARTS REQUIRED:

REPAIR PROCEDURE:

Body - Howl/Honk Noise From A-Pillar/Windshield Area|Page 10578 > < Cowl Moulding / Trim|Removal|Page 10569